How Much Protein Do I Need?

The amount of protein we need day to day depends on a few factors. This email should help you guys figure out how much you need for what you want to achieve and where it should be coming from. If you’d like to watch the video version then click here:


You can do this based in kilograms or in pounds, general consensus in the lifting community seems to use pounds when talking about nutrition, just because the numbers work out easier!

So to start, we need to find our bodyweight in pounds, (lbs). Either google it, (e.g. 60kg to lbs) or multiply your bodyweight by 2.2, (e.g. 60 x 2.2 = 132lbs).

Now that we have your bodyweight in pounds, we can talk about our different values.

In order to put on muscle we need to be eating 1g of protein per 1lb of muscle, so for the example above, that person would need to be eating 132g of protein per day to adequately recover from training and build muscle.

If you are maintaining your bodyweight and not doing any dedicated training (e.g. on a holiday), 0.8g per pound should be sufficient in retaining your muscle mass. E.g. 132 x 0.8 = 106g per day.

If you are losing weight then 1g per pound would also suffice – unless you have developed muscle and are looking to cut down body fat but keep the muscle you’ve gained. Most people want to lose fat without losing muscle, and for this goal you’d need to be eating at least 1.2g of protein per pound. E.g. 132 x 1.2 = 158g of protein every day.


So where do we get our protein? The best sources are from lean meats (chicken/turkey/fish) and beans. Both of these pack a lot of protein and are both readily absorbed by the body. 

Second to this would come rice, oats, nuts and seeds. They’re also high quality sources but the amount of protein in these foods are less, so you’d need to eat more volume to make up the difference – also they all contain higher amounts of either carbs/fats, which may rack up your total calories for the day before you hit your protein goal.

Other meats are usually too high in fat to be worth the protein, veggies also contain a little bit of protein but you’d need to eat a ridiculous amount of volume to hit your targets, making it unsustainable.

And a quick note on eggs. Whole eggs have a fat content almost equal to the protein, and per egg it actually isn’t that much – with the protein being around 6g – 8g per egg and the fat being 4g – 6g. The main benefit of an egg is that 100% of the protein in it is absorbed (when cooked, raw doesn’t count) making it a favourite among bodybuilders. In other words, there are better sources of protein than an egg, so don’t be worried about cutting them out if you’re looking to minimise your dairy.

Thanks guys! If you have any questions relating to your nutrition then let us know, we’d be happy to help everyone out.

Resistance Starch For Fat Loss

Hey guys, its Stefan from Fitness Room here! 

Today we are going over resistant starch and how it can benefit you and your weightloss!

If you aren’t a reading kind of person, jump onto our YouTube where we posted a video version of this email:

Let’s get into it!

Here are the ins and outs of resistant starch:

Resistant starch can’t be digested by our body, but instead becomes food for our gut bacteria. Most starch is easily digested, starch is dissolved in the small intestine and then absorbed in the body. The remaining non digestible portion of starch is called resistant starch. This starch acts as food for our good bacteria. As our bacteria eat the resistant starch, they leave off small particles of carbohydrates for other neighbouring bacteria to eat. After the neighbouring bacteria have eaten those carbs there is a byproduct that is created called butyrate. Butyrate is used as energy for our body. As the butyrate builds up, it is absorbed by the large intestine. Butyrate encourages blood to flow into the large intestine, keeping the tissue healthy. If our diet contains enough resistant starch, the cells of our large intestine will continue to use butyrate as energy to keep it healthy.

Resistant starch will allow you to have a better body composition. Your body looks to expel unnecessary fat that is eaten together with foods that are high in resistant starch. 

Foods that are high in resistant starch include greens, beans, onions, mushrooms, berries and seeds.

Here’s a cool meal I like to have!

Oatmeal idea:

½ cup of oats

1 cup of soy milk

½ cup of walnuts

5 strawberries cut up

1 banana cut up

½ cup of sunflower seeds

½ cup of flax seed powder

Hope you have learnt a thing or two about resistant starch!

Stefan Pejoski and Team at Fitness Room

How To Write Your Own Program

We think it’s important that you guys know what goes into a program and also how to make your own program. This is a good skill to understand in order to make sure your training is working, and also allowing you to confidently change things in your program without throwing everything out of whack! 

If you guys want to watch a video instead of read, here’s the link:


First thing to do when you want to begin a new program, especially if it’s the first time, is write down your goals. This can be as in depth as you want to go with it, but you need to choose from a more general goal first, such as: Building Strength, Building Muscle, Getting Fitter, Losing Fat. It may also be prudent to write down why you want to achieve this goal, in order to stay motivated. 


The next thing to look at is the amount of times you’re coming in per week and on which days your training each muscle group. In order to create a balanced and healthy body most people will need to be train all of their muscle groups two or three times per week, this is dependent on your goals and experience.

This is one of the places where people’s programs differ. You could have one person training 3 days per week, full body sessions; or someone training 6 days per week doing a different muscle group each day. There are a ton of combinations, so it’s important you find out what works best for your schedule. 


Now that you’ve figured out what muscle groups you’ll be training and what days you’ll be in the gym, you need to decide on the exercises you’ll do to target those muscle groups.

There are a few staples that are recommended by most professionals, (e.g. barbell squats, deadlifts, rows, bench press, etc), these are generally compound movements. If you’re a beginner then it’s a good idea to google the best exercises for a particular muscle group or ask a trainer to help you choose and then learn the exercises. 


Once you’ve got your exercises sorted, you will need to choose the sets and reps you’ll be doing for each exercise. This can also be highly variable, but the main ranges that we work in are:

Strength: 4 – 6 Reps, 4 – 5 Sets

Muscle Building: 8 – 12 Reps, 3 – 4 Sets

Endurance: 15+ Reps, 3 – 4 Sets

You can apply different ranges for different exercises, and some exercises lend themselves better to higher or lower rep ranges. This is something to experiment with or bring up with your coach. Lots of sites have examples of sets/reps online after you look up the exercises you want to add to your program, but if you aren’t sure then feel free to email us and ask!


Next you have to choose the weight you’ll be lifting, when starting out you’ll just have to experiment. Remember that if you’re in a specific rep range, you want to always be aiming to fail towards the end of the range. To make sure you’re exercising with enough intensity to make a change, you need to be getting close to failure. 

I.e. if a program prescribes you 8 reps for an exercise, doing a 9th or 10th rep should be near impossible.


Finally you must be taking specific steps to progress. Every two weeks you should be aiming to make your training harder in some way. The most common way is to increase your weights, which is recommended for a beginner – but you’ll also need other ways in order to make sure you don’t plateau. 

Other common ways of progressing include: Increase Reps or Sets, Decrease Rest Time Between Sets, Perform Exercises Slower or Supersets (perform exercises back-to-back, like a circuit).

Note: If you do not progressively overload, you will not see any longterm progress. It’s impossible to make your body change if it doesn’t have a new stimulus to adapt to – so make sure you make your training difficult! Only you know how hard you can go.

If you guys want a new program, or a template to follow when designing your own program, Stefan has uploaded his personal training plan to our website, it’s a program he started this week to build muscle and strength. Go to to download it!

Thanks guys! If you have any questions about anything here then we’d be happy to help out!

How Hard Should You Train?

It’s important to approach your training with enough intensity to force your body to adapt and make you see results. However, going too hard may actually be slowing down your progress for both muscle and strength gains.

Most professionals tend to agree that training to absolute failure isn’t really worth the extra stress placed on the body, or the poor technique that starts creeping up on us as we approach our absolute max.

So where do we go from here? A lot of people tend to think in a binary way where if you aren’t training to failure, sub-maximal training must be the answer. While this is technically true, a lot of people take this idea and turn their training into just ‘going through the motions’. Training is supposed to be hard and it’s supposed to hurt, so reconciling the gap between training to failure and not training hard enough comes down to the intensity you bring to each set.

When faced with rep ranges, (e.g. 8 – 12 or 6 – 8), people tend to pick weights that satisfy the upper end of the range and then some. Instead, you should approach rep ranges with a weight that would make you fail at the upper end of that range, or at least within two reps. 

So for example, in an 8 – 12 rep range you should pick a weight that has you struggling to reach 12, and pretty much failing at 13 or 14.

This is essential for when it comes time to progress in your program, how do you know when to make things harder and increase your weights? When you start hitting 12 reps in the range more easily! This is a clear sign that you can increase the weight, which will inevitably drop the amount of reps you can do from 12 back down to 8.

It’s similar when faced with a single number too, if the set just calls for just 6 reps or just 15 reps, you want to make sure that getting another two reps above these numbers would be possible, but a huge struggle.

When it’s an RM (Rep Max), things get a little bit different. For beginners, RMs are actually one of the most effective ways of writing programs, because it makes you push hard without failing. It says rep max but most beginners aren’t inherently aware of how hard going to absolute failure actually is, so instead, they do what we described above and go hard enough that they’re within a couple reps of failure at the RM, which turns out to be the sweet spot for intensity! That’s why we often use RM in our Group Training with those exercises that require especially high intensity.  

For more trained lifters, RMs might not be as prudent, because these lifters will take it to absolute failure, which may result in poor technique or too much stress on the body if they aren’t recovering properly. But this depends on the individual, i.e. their sleep, diet and training experience. 

On that note, going to failure isn’t completely bad, it just requires you to be experienced enough to make sure your form doesn’t suffer and you also need to have your sleep and diet, (recovery), on point. 

Hopefully that cleared things up and you guys know exactly how hard you need to be training, no matter the sets and reps you’re looking at. If you have any questions about anything here then make sure to let us know, we’d be happy to help. Thanks for getting this far in the email, you’re a trooper of a reader! If you haven’t already started up with our Group Training and are interested in what we do, here is a link to see us in action:

Thanks guys!

Maximise Your Day

Hey guys, its Stefan here from Fitness Room!

it’s a beautiful day so make sure you make the most of it! Here are a few things you can do to enhance the quality of your already blessed day!

1) Get out in the sun for at least 30 minutes to get that Vitamin D.

2) Drink at least 3L of water but if you’re exercising, plow down a couple more millilitres to keep the dehydration demon far far away.

3) Do some exercise. If you aren’t heading to the gym today then go for a walk and do some bodyweight exercises like pushups and sit ups! It’s super easy so get off your asses and move it!

4) Remember to eat a bunch of plant based foods that are full of water, vitamins, minerals, and cancer fighting compounds like antioxidants and phytonutrients!

5) Put down the bloody shortbread creams and oreos and instead, pick up a banana berry smoothy. 2 bananas, 1 cup of berry mix, 1 tbl spoon of flax seed and 1 cup of organic soy milk. Done. You’re good to go.

Doing all of these things should be pretty easy and it will drastically improve how you feel both physically and mentally!

Thanks guys, see you at tonight’s group session!

Stefan Pejoski and Team at Fitness Room


Hey! Its Stefan from Fitness Room! Today I want to talk to you about the best superfoods ever!

Why are superfoods important?

Well, it’s in their name, superfoods have a greater nutritional profile than most other foods! A nutritional profile just means the amount of nutrients that can be found within a food. In other words, superfoods contain more nutritional bang for their buck!

Lets get started with the damn list!

Superfood Number #1 

Leafy Green Vegetables

Bok Choy



Collard Greens


Superfood Number #2






Goji Berries

Superfood Number #3







Superfood Number #4

Whole grains






Superfood Number #5

Herbs mate






So this entire email is pretty much a shopping list for you. If you eat a little bit from every category I listed, your health will drastically improve. There’s no doubt about it.

So, eat your bloody herbs, and all will be well.

Stefan and Team at Fitness Room